GORMAN-RUPP
Eradicator™ Solids Management System
Gorman-Rupp, pump manufacturer of Mansfield, Ohio, offers new Eradicator™ Solids Management System for Super T Series® line of self-priming centrifugal trash pumps. Eradicator was developed for demanding applications. It dramatically improves system uptime, thus decreasing service calls and overall maintenance costs. The system consists of a new, patented lightweight inspection cover, an innovative back cover plate incorporating an obstruction free flow path, and an aggressive self-cleaning wear plate including laser cut notches and grooves, along with a revolutionary tooth designed to clear material from the eye of the impeller. For more information, contact Cyndi Hoffner at 419.755.1207 or choffner@gormanrupp.com, or visit www.grpumps.com.

Mouvex-A55
MOUVEX
A Series Eccentric Disc Pumps
Mouvex A Series pumps are positive displacement pumps that utilize eccentric disc technology, which enables self-priming and run-dry capabilities while maintaining a constant flow rate regardless of changes in viscosity and pressure. These pumps also maintain their initial performance over time and are ATEX-certified for use in potentially dangerous environments with the ability to run-dry for up to six minutes. Available in seven different sizes–AZ, AD, A6, A12, A18, A31, and A55–Mouvex A Series pumps have maximum speeds to 600 rpm, can handle temperatures up to 302 degrees Fahrenheit (150 degrees Celsius), as well as suction and discharge ports from 1-½ through 4-inch in size. A Series pumps are offered with a variety of connection types and options, including the availability of both Mouvex or standardized mechanical seals, which helps expedite installations regardless of location. For more information, contact Christophe Jovani, PSG®–EMEA marketing, at christophe.jovani@psgdover.com.
Krohne
KROHNE
Tidalflux
The Tidalflux 2300 is Krohne’s unique flow meter for partially filled pipes. The meter can measure flows in pipes between 10 and 100 percent full and its non-contact sensor is not affected by oils and fats floating on the surface. In addition, Tidalflux has a broad diameter range to fit pipes up to DN1600 or 64 inches, and has high chemical and abrasion resistance to provide exceptional durability. For more information, contact Sandy Olley at 800.356.9464 or s.olley@krohne-inc.com, or visit www.krohne.com. Also, Visit WEFTEC Booth 3216 to learn more about the latest analytical sensors, flow meters, and level meters.
Transducers
TRANSDUCERS DIRECT
CirrusSense® TDWLB Remote Monitoring for Android
Transducers Direct introduces its new Android app for remote monitoring and programming of the CirrusSense® TDWLB pressure transducer, the first sensor in the world to use wireless Bluetooth LE and a patent pending design to connect pressure sensors to mobile devices and computers. The CirrusSense® sensor is ideal for remote reading of pressure/temperature in A/C and refrigeration lines, compressed air lines, water lines, dental and industrial gas lines, etc. It uses patent-pending circuitry to provide a twelve-to-eighteen month battery life and redundant sensing. The sensor is available in two different compensated accuracies of 1 percent and 0.25 percent, with an external temperature sensing probe as an option for measuring sub-cooling and superheat in HVAC applications. The CirrusSense transducer is certified Bluetooth® Smart, as well as FCC certified. For more information, contact Mark McDaniel at 513.583.9491 or mark_mcdaniel@transducersdirect.com, or visit www.transducersdirect.com.
Electro
ELECTRO STATIC TECHNOLOGY
Universal Mounting Brackets
New Universal Mounting Brackets allow fast, easy installation of Aegis® iPro, Aegis® iPro-MR, and Aegis® WTG Bearing Protection Rings on large motors. Specially designed brackets attach to iPro or WTG Rings with screws and have slotted legs (for mounting to motor) that accommodate bolt circles from 2.64 to 7.79 inches in diameter. Brackets are provided with ½, 1, and 1-½inch standoff spacers to provide sufficient clearance for shaft shoulders, slingers, or other end bell protrusions. Mounting bolts, flat washers, and lock washers are also included. For more information, contact Adam Willwerth, sales and marketing manager, at 866.738.1857 or sales@est-aegis.com, or visit www.est-aegis.com.
Morgan
MORGAN ADVANCED MATERIALS
Gold Assay Furnaces, Crucible, and Cupels
Morgan Advanced Materials offers gold assay fusion and cupellation furnaces, crucibles, and cupels, ideal for quantitative and qualitative analysis of mined ore samples in the gold mineralization industry. Morgan’s excellent manufacturing quality, superior technical service, and responsive lead times, have led to recognition as a leader in the supply of crucibles to non-ferrous metals industries worldwide. Morgan’s gold assay furnaces, crucibles, and cupels are an excellent choice for both exploration multi-sample testing, to determine a mine’s potential and for quality control grade tests, to ensure consistent gold content levels in material sent to mills. For more information, contact Francesca Minett at francesca.minett@morganplc.com.
____________________________________________
MODERN PUMPING TODAY, September 2015
Did you enjoy this article?
Subscribe to the FREE Digital Edition of Modern Pumping Today Magazine!
SUBSCRIBE_FLAT_Master_RKWL